Flow Battery Could Smooth Irregular Wind and Solar Energy Supply

New materials hold a charge longer and use nontoxic, inexpensive metals

  • By Matthew Gunther, ChemistryWorld on September 28, 2015

Scientists in the US have developed an alkaline flow battery that they hope will help to tackle the tricky problem of storing energy from renewable power sources such as wind and solar. The new battery’s performance is similar to current commercial flow batteries but uses cheap and non-toxic organic molecules to store energy. By contrast, conventional flow batteries use expensive and hazardous transition metal solutes.

Solar and wind energy resources are a growing issue for utilities as they try to match fluctuating consumer demand for electricity to the intermittent nature of renewable energy generation. In order to stop energy companies from resorting to established coal and gas infrastructure to prop up the electricity grid, many see long term energy storage as a way to effectively integrate renewables into national energy strategies.

Batteries are one technology that offers an answer to this problem, but the market is flooded with different products, from lithium-ion to lead-acid cells, that are costly, potentially hazardous on an industrial scale and unable to store energy for extended periods. But there may be an alternative.

‘Flow batteries are significantly different than conventional batteries,’ comments Robert Savinell, an electrochemical energy storage expert from Case Western Reserve University, US, who was not involved in the work. ‘The reason is that they’re more adaptable for large scale energy storage.’

‘[A flow battery] closely resembles a fuel cell where normally … you have hydrogen and oxygen gas streams entering into an energy conversion device separated by a membrane and you have two electrodes,’ explains Michael Marshak from the University of Colorado Boulder, who led the team that created the new battery. But, in the case of a flow battery, a positive and negative liquid electrolyte is pumped into the cell from separate reservoirs. The positive electrolyte gives up electrons, which pass through an external circuit to combine with the negative-charged electrolyte, with cations from the electrode being free to pass through the ion-selective membrane. Following this charging process, the electrolytes can be stored in external tanks, and, as the battery current flow is reversible, pumped back through the central battery for discharging at a later time.

This makes flow batteries easily scalable and adaptable, according to Marshak, as the discharge time only scales with the size of the external electrolyte reservoirs and not the number of batteries used – you only need one.

Going with the flow
However, just like conventional batteries, current flow batteries on the market contain expensive and hazardous electrolytes. ‘The most commercialized flow battery currently is a vanadium flow battery,’ comments Marshak. ‘[They] use vanadium ions dissolved in sulfuric acid and the challenge there is just the sheer cost of vanadium.’

Marshak and his colleagues decided to replace these components with cheaper, earth-abundant, and non-toxic compounds in an alkaline solution. The team dissolved commercially available organic molecules, such as 2,6-dihydroxyanthraquinone and ferrocyanide, commonly used as a food additive, in two separate 1M potassium hydroxide solutions and pumped them through a lab-scale flow cell made from graphite flow plates and carbon paper electrodes. The cell performs similarly to its vanadium counterpart and operates at 1.2V, which falls within the voltage range required for commercialization.

Although the cell can operate at a desirable voltage at room temperature, the fact that it remains stable will perhaps come as a surprise, according to the Marshak. ‘Organic molecules – people tend to think of them being able to break down but the ones that we’ve selected are incredibly stable,’ he says. ‘They‘ve actually been used in other industrial processes for a long time, including the dye industry [or in] paper pulping.’

Savinell is impressed with the design and believes that, by operating at higher pH, the alkaline flow battery will gain an edge over acid-based cells and possibly open the door to a whole host of new electrolytes. ‘One advantage is it’s less corrosive … [and] the second advantage is that you can operate at higher voltages,’ he tells Chemistry World. ‘There’s potential for all sorts of different types of quinone-type structures … to come up with perhaps even different systems that are even cheaper or more efficient in the long run.’

This article is reproduced with permission from Chemistry World. The article was first published on September 25, 2015.

The information contained in this article and provided by VanadiumCorp is sourced from third-party content in the public domain and is for general information purposes only, with no representation, guarantees of completeness, warranty of any kind, express or implied regarding the accuracy, adequacy, validity, availability, completeness, usefulness or timeliness of any information contained within. Please also excuse any syntax as authors and reposted articles are sourced from global origins. UNDER NO CIRCUMSTANCE SHALL WE HAVE LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THIS REPOSTED ARTICLE. THE USE OF THIS ARTICLE AND YOUR RELIANCE ON ANY INFORMATION CONTAINED HEREIN IS SOLELY AT YOUR OWN RISK. VANADIUMCORP ALSO ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR OMISSIONS IN THE CONTENT OF THIS ARTICLE.