Where should batteries be put to manage wind and solar power?

By Will Gorman for Utility Dive
The following is a contributed article by Will Gorman, a graduate student researcher in the Electricity Markets and Policy Department at Lawrence Berkeley National Laboratory.

Developers are increasingly adding batteries to new renewable power projects, to make “hybrid” power plants that can deliver power more consistently, and at higher-value times.

While wind and solar resources are location-specific, batteries can go practically anywhere — including in pockets of the grid where storage adds a lot of value.

But our team at Berkeley Lab wanted to know which is better — putting batteries with the generator at hybrid plants or putting them where they deliver the highest value to the grid?

Generation + Storage

The rapid growth of solar and wind is having a growing effect on grid operations and on the value of wholesale power by time of day and location. California’s solar-driven “duck curve” is the most prominent example, as solar generation dominates the market during the day but fades as the sun goes down.

Developers are adding batteries to their solar projects to shift generation into the evening, to capture higher power prices during the “head of the duck.” Wind projects too can use batteries to smooth power output and avoid congestion.

In many cases, the batteries are located with and integrated into the renewable power project, as a hybrid power plant. Wind and solar plants are located to take advantage of strong winds and sunshine, with plentiful land and good grid connections. But batteries can be put practically anywhere, like in high-value locations where they can provide additional values to the local grid, such as voltage support, congestion relief and resilience. With the right controls, they can also provide system-wide benefits, such as capacity and load following.

We wanted to know where batteries should be located to provide the highest value, and how are developers making the decision. Do hybrid renewable-plus-battery power plants provide more value than independently sited installations?

Value differences

Using wholesale power market prices from 2012—2019 across the seven main U.S. independent system operators (ISOs), a new study compares the market value of hybrid projects to the value of the same generators and batteries deployed separately.

The study finds that adding four-hour duration batteries sized to 50% of the capacity of a wind or solar project raises the value by $3-$22/MWh depending on the year and region, with an average value of $10/MWh. The highest boost occurs in California ($15/MWh), where the value of adding storage to solar rises in tandem with increased solar penetration.

But an even higher value comes from siting the same batteries separately, in a nearby high-value location. This strategy results in higher value than co-located projects in nearly all markets and years, ranging from $2 – $50/MWh, with an average value boost of $12.50/MWh. The highest values are found in constrained regions, like New York’s Long Island, while lower values occur in Texas in certain years of the study period.

Comparison of values for combined and separate projects (Dots represent value for a specific nodal location in the given region and year. Dots above the dashed line indicate higher value for separately-located projects; dots below the line show higher value for combined projects)
Permission granted by Lawrence Berkeley National Laboratory

Through a variety of strategies, the value penalty of co-located projects can be reduced, such as by recharging batteries from the grid during low-price hours, or sizing the interconnection capacity so both the generator and the battery can deliver power to the grid at the same time.

Content in the public domain and is for general information purposes only, with no representation, guarantees of completeness, warranty of any kind, express or implied regarding the accuracy, adequacy, validity, availability, completeness, usefulness, or timeliness of any information contained within. Please also excuse any syntax as authors and reposted articles are sourced from global origins. UNDER NO CIRCUMSTANCE SHALL WE HAVE LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THIS REPOSTED ARTICLE. THE USE OF THIS ARTICLE AND YOUR RELIANCE ON ANY INFORMATION CONTAINED HEREIN IS SOLELY AT YOUR OWN RISK. VANADIUMCORP ALSO ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR OMISSIONS IN THE CONTENT OF THIS ARTICLE.

Continue reading the full story here >>
 

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *